HIT-RE 500 V3 Epoxy anchor
Package SC 16 Y #3684202
Ultimate-performance injectable epoxy mortar with approvals for rebar connections and heavy-duty anchoring
- Approvals / test reports: ETA, ICC-ES report (concrete), Seismic
- Seismic loading: Yes
- Fire resistance: Yes
Customers also searched for Epoxy, Angkur Chemset, Lem Beton, Chemical Anchor or Rebar.
Technical Data
Documents
Features & Applications
Features
- High performance and technical superiority as per international approvals
- Suitable for diamond-cored holes – when prepared using the TE-YRT roughening tool
- Injectable epoxy suitable for all-year use – cures at temperatures down to -5°C / 23°F
- Longer working time – allows greater flexibility during installation
- Suitable for water-filled holes and underwater applications (depending on rod specification and approvals)
Applications
- Structural connections with post-installed rebar (e.g. extension/connection to walls, slabs, stairs, columns, foundations, etc.)
- Structural renovation of buildings, bridges and other civil structures, retrofitting and re-strengthening of concrete members possible
- Anchoring structural steel connections (e.g. steel columns, beams, etc.)
- Fastenings requiring seismic qualification
- Fastening in natural stone and wood, including GLT and CLT made by spruce, pine or fir.
Consulting & Support

INJECTABLE EPOXY ANCHOR WITH SEISMIC APPROVALS
Hilti HIT-RE 500 V3 sets new standards for post-installed rebar and anchoring applications
For use in cracked concrete and under seismic conditions.
Fifteen years ago, Hilti set legendary standards for designers and contractors alike with HIT-RE 500 – one of the first injectable epoxy anchors for post-installed rebar and anchoring applications. And because our customers needed the same high performance and reliability in cracked concrete and seismic applications, we introduced HIT-RE 500-SD for fastening under these conditions.
The new HIT-RE 500 V3 delivers performance and safety in design while making installation even easier and faster than ever before.
TECHNICAL SPECS
Base materialBase material | Base materialCracked and un-cracked concrete |
Recommended applicationsRecommended applications | Recommended applicationsPost-installed rebar connection |
All anchoring applications | |
CategoryCategory | CategorySlow cure epoxy injection mortar |
Curing time at +20°CCuring time at +20°C | Curing time at +20°C7,0 h. |
Working time at +20°CWorking time at +20°C | Working time at +20°C30 min. |
ETA approvalsETA approvals | ETA approvalsETA-16/0143 for Anchoring |
ETA-16/0142 for Post-installed rebar | |
Load typeLoad type | Load typeStatic, seismic |
Anchor diametersAnchor diameters | Anchor diametersM8 – M30 |
Rebar diametersRebar diameters | Rebar diametersØ8 - Ø40 mm. |
Drilling methodDrilling method | Drilling method |
SafeSet with Hilti hollow drill bitSafeSet with Hilti hollow drill bit | SafeSet with Hilti hollow drill bitYes |
Hammer drill bitHammer drill bit | Hammer drill bitYes |
Diamond coringDiamond coring | Diamond coringYes |
Base material conditionBase material condition | Base material condition |
DryDry | DryYes |
WetWet | WetYes |
Water filledWater filled | Water filledYes |
UnderwaterUnderwater | UnderwaterYes |