Standard fixings for support systems
Standard fixation elements for modular support systems – clips, couplers, clamps, threaded rods, air duct fasteners, bolts, nuts, screws and more
30 Products
Filter
- Description
- Galvanised pre-cut lengths of threaded rod with 4.8 steel grade
- Material composition
- Steel grade 4.8
- Surface finish
- Indoor Coated - Electro galvanised
- Load range
- Light-duty
- Description
- Galvanised threaded rod with 4.8 steel grade
- Material composition
- Steel grade 4.8 - DIN 976-1
- Surface finish
- Indoor Coated - Electro galvanised
- Load range
- Light-duty
- Description
- Hot-dip galvanised (HDG) threaded rod with 4.8 steel grade
- Material composition
- Steel grade 4.8
- Surface finish
- Hot-dip galvanized
- Base material type
- n/a
- Description
- Galvanised threaded pipe with 4.6 steel grade used as an accessory for various applications
- Material composition
- Steel grade 4.6
- Surface finish
- Indoor Coated - Electro galvanised
- Base material type
- n/a
- Description
- Hot-dip galvanised (HDG) threaded pipe with 4.8 steel grade used as an accessory for various applications
- Material composition
- Steel grade 4.6
- Surface finish
- Outdoor Coated - HDG
- Insulation
- Without
- Description
- Galvanised flat washer corresponding to ISO 7089
- Material composition
- Steel - DIN EN ISO 7089
- Surface finish
- Indoor Coated - Electro galvanised
- Load range
- Light-duty
- Description
- Galvanised flat washer similar to ISO 7089
- Material composition
- Steel
- Surface finish
- Indoor Coated - Electro galvanised
- Load range
- Light-duty
- Description
- Hot-dip galvanised (HDG) flat washer corresponding to ISO 7089
- Material composition
- Steel - DIN EN ISO 7089
- Surface finish
- Outdoor Coated - HDG
- Load range
- Light-duty
- Description
- Hot-dip galvanised (HDG) flat washer similar to ISO 7089 used in various applications
- Material composition
- Steel
- Surface finish
- Outdoor Coated - HDG
- Load range
- Light-duty
- Description
- Stainless steel (A2) flat washer corresponding to ISO 7089
- Required material grade
- A2
- Material composition
- Stainless steel A2 – DIN EN ISO 7089
- Surface finish
- Outdoor Plus - Stainless Steel
- Description
- Stainless steel (A4) flat washer corresponding to ISO 7089
- Required material grade
- A2, A4
- Material composition
- Stainless steel A4 – DIN EN ISO 7089
- Surface finish
- Outdoor Plus - Stainless Steel
- Description
- Hot-dip galvanised (HDG) flat washer corresponding to ISO 7093 used in various applications
- Material composition
- Steel - DIN EN ISO 7093-1
- Surface finish
- Outdoor Coated - HDG
- Load range
- Light-duty
- Description
- Galvanised grade 8 hexagon nut corresponding to DIN 934
- Material composition
- Steel grade 8
- Surface finish
- Indoor Coated - Electro galvanised
- Load range
- Medium-duty
- Description
- Hot-dip galvanised (HDG) grade 8 hexagon nut corresponding to DIN 934
- Material composition
- Steel grade 8
- Surface finish
- Outdoor Coated - HDG
- Base material type
- n/a
- Description
- Stainless steel (A2) hexagon nut corresponding to DIN 934
- Required material grade
- A2
- Material composition
- Stainless steel A2-70
- Surface finish
- Outdoor Plus - Stainless Steel
- Description
- Stainless steel (A4) hexagon nut corresponding to DIN 934
- Required material grade
- A2, A4
- Material composition
- Stainless steel A4-70
- Surface finish
- Outdoor Plus - Stainless Steel
- Description
- Hot-dip galvanised (HDG) prevailing torque hexagon nut with self-locking mechanism for use outdoors
- Material composition
- Steel grade 8
- Surface finish
- Outdoor Coated - HDG
- Environmental conditions
- Outdoor, low to moderate pollution (C3 / C4 - low)
- Description
- Hot-dip galvanised (HDG) prevailing torque hexagon nut with self-locking mechanism for use outdoors
- Material composition
- Steel grade 8
- Surface finish
- Outdoor Coated - HDG Plus
- Environmental conditions
- Outdoor, low to moderate pollution (C3 / C4 - low)
- Description
- hot-dip galvanised (HDG) hexagon nut with self-locking mechanism used with all MI connectors
- Material composition
- Steel grade 8
- Surface finish
- HDG: 45 µm - DIN EN ISO 1461
- Environmental conditions
- Outdoor, low to moderate pollution (C3 / C4 - low)
- Description
- Galvanised round coupling nut for extending threaded rods
- Material composition
- Steel
- Surface finish
- Indoor Coated - Electro galvanised
- Load range
- Light-duty
- Description
- Hot-dip galvanised (HDG) coupling nut for extending threaded rods
- Material composition
- Steel grade 4.6
- Surface finish
- Outdoor Coated - HDG
- Base material type
- n/a
- Description
- Galvanised hexagonal coupling nut for extending threaded rods
- Material composition
- Steel
- Surface finish
- Indoor Coated - Electro galvanised
- Load range
- Light-duty
- Description
- Galvanised hexagon screw corresponding to DIN 933
- Material composition
- Steel grade 8.8
- Surface finish
- Indoor Coated - Electro galvanised
- Load range
- Medium-duty
- Description
- Hot-dip galvanised (HDG) hexagon screw corresponding to DIN 933
- Material composition
- Steel grade 8.8
- Surface finish
- Outdoor Coated - HDG
- Load range
- Medium-duty
- Description
- Galvanised hexagon screw corresponding to DIN 931
- Material composition
- Steel grade 8.8
- Surface finish
- Indoor Coated - Electro galvanised
- Load range
- Medium-duty
- Description
- Hot-dip galvanised (HDG) hexagon screw corresponding to DIN 931
- Material composition
- Steel grade 8.8
- Surface finish
- Outdoor Coated - HDG
- Load range
- Medium-duty
- Description
- hot-dip galvanised (HDG) screw for easier fastening and one-handed adjustment of MI and MIQ connectors
- Material composition
- Steel grade 8.8
- Surface finish
- HDG: 45 µm - DIN EN ISO 1461
- Environmental conditions
- Outdoor, low to moderate pollution (C3 / C4 - low)
- Description
- Galvanised thread adapters to connect various internal and external thread diameters
- Material composition
- Steel grade 4.6
- Surface finish
- Indoor Coated - Electro galvanised
- Load range
- Light-duty
- Description
- Galvanised air duct bracket with a length of 100 mm for fastening ventilation ducts directly to ceilings
- Noise reduction
- 12 dB (A)
- Material composition
- Angle: St1203 - DIN EN 10130, Plate: DC01-A-g - DIN EN 10130
- Surface finish
- Indoor Coated - Electro galvanised
- Description
- Flat washer for fastening pipe rings to strut trapeze, for outdoor use with low pollution
- Material composition
- Q235 or better steel
- Surface finish
- Outdoor Coated - HDG
- Environmental conditions
- Outdoor, low to moderate pollution (C3 / C4 - low)